The Best 71301T Exam Study Material and Preparation Test Question Dumps
Get Ready to Pass the 71301T exam Right Now Using Our ACIS Exam Package
NEW QUESTION # 13
Which configuration action is necessary to optimize an Internet Friendly Gateway for peak performance?
- A. Scheduling daily system restarts
- B. Regularly updating user access permissions
- C. Decreasing the number of connected devices
- D. Continuously monitoring and adjusting traffic rules based on usage patterns
Answer: D
NEW QUESTION # 14
The Avaya WebRTC solution uses the web intensively to make media calls from a standard web browser in the internet, into internal and secure communication premises in the enterprise. Which statement about security between the Enterprise-edge and those standard Web browsers in the internet is true?
- A. WebRTC only works within the Enterprise network. External Web Browsers must connect through an Avaya Session Border Controller for Enterprise (SBCE) via a SIP trunk.
- B. There must be a VPN connection between the Web Browser and the Enterprise-edge to build a WebRTC link.
- C. A trust relationship based on certificates must be built to make WebRTC work.
- D. No trust relationship exists between enterprise edge security and web browsers; therefore, the security strategy is based on an Authorization Token instead.
Answer: D
Explanation:
Validation of the authorization token.
The WebRTC Snap-in will validate the authorization token created and encrypted by the web server. If the snap-in can decrypt the token and ensure that the time stamp is valid, it knows that the incoming HTTP request is valid. The time stamp will usually be short lived; on the order of 5-
10seconds to protect against reply attacks.
NEW QUESTION # 15
In the context of Avaya Aura Presence Services 7.x, what is a Fetcher?
- A. It is the presence information about a user that the system reports.
- B. It is a watcher that is subscribing to current and future presentity information from another user.
- C. It is a user whose devices are sending status or presentity information on his behalf using a Publish message regarding his communication status.
- D. It is a kind of watcher that requests a one-time view of the user's current presentity information, but does not get future presentity information for a user.
Answer: D
Explanation:
Fetchers pull the value of presence information for a specific presentity from the presence service. If a fetcher is fetching information on a regular basis, it is called a poller. Subscribers, on the other hand, subscribe to presentity information on the presence service.
NEW QUESTION # 16
You need to connect Avaya BreezeTM platform that is hosting Avaya Aura Presence Services Snap-in with Avaya Aura Session Manager (SM). Which three are needed? (Choose three.)
- A. one Entity Link from SM to Avaya BreezeTM
- B. ports UDP 5060 and TLS 5061
- C. ports TCP 5060 and UDP 5060
- D. TLS 5061 and TLS 5062
- E. one Entity Link from SM to Avaya Aura Presence Services Snap-in
Answer: A,D,E
Explanation:
BD: Administering Entity Link between Presence Services Cluster SIP Entity and Session Manager Procedure
1. On the System Manager web console, navigate to Elements > Routing > Entity Links.
2. In the Name field, enter a name for Entity Link.
3. In the SIP Entity 1 field, select the Session Manager instance.
4. In the Protocol field, select TLS.
5. In the Port field, type 5062.
Note: Note that this port number cannot be the same as the port number administered in
"Administering Entity Link between Avaya Breeze and Session Manager".
CD: Administering Entity Link between Avaya Breeze and Session Manager. About this task Create an En2tity Link to connect Session Manager to Avaya Breeze. You must administer separate Entity Links for Avaya Breeze servers in order to open SIP listeners on the designated ports. Session Manager requires a Listen Port with the Listen Port as 5061, Protocol as TLS, and Default Domain as the login domain of endpoint devices. Without this, PPM will fail for SIP endpoints.
NEW QUESTION # 17
In the Avaya Session Border Controller for Enterprise (SBCE), before a traffic carrying Network Interface (A1 or B1) can be pinged, to which state do you have to toggle the status on Device Specific Settings > Network Management / Interfaces?
- A. In-Service
- B. Accept Service
- C. Enabled
- D. Active
Answer: C
Explanation:
Commission the SBC-SBC Configuration
Click the Toggle link for both the A1 and the B1 interfaces. The Administrative Status for both A1 and B1 changes to Enabled:
NEW QUESTION # 18
How does the integration of Presence Services impact the user experience on the Avaya Breeze platform?
- A. Limits customization options
- B. Simplifies communication workflows
- C. Increases system setup time
- D. Reduces system reliability
Answer: B
NEW QUESTION # 19
Which statement about WebRTC and Media Resources is true?
- A. WebRTC relies on the Avaya Aura Media Server (AAMS) to convert the WebRTC media stream to a SIP media stream.
- B. WebRTC does not use any Media Resources since it only handles Text-Chat sessions.
- C. WebRTC uses its own embedded proprietary technology to handle and process Media Packets.
- D. WebRTC uses Media Resources from a Hard-Based Media Gateway controlled by Avaya Aura Communication Manager (CM).
Answer: A
Explanation:
The Avaya Media Server can translate WebRTC media into a SIP media stream.
References:
http://www.avaya.com/blogs/archives/2014/10/an-introduction-to-the-avaya-webrtc-snap-in.html
NEW QUESTION # 20
When planning the Avaya Session Border Controller for Enterprise (SBCE) for SIP Trunking, what is a good practice to adopt?
- A. Name all internal and external interfaces exactly the same.
- B. Name Interfaces consistently, for example, A1 for Internal network to Call Server and B1 for external to Trunk Server.
- C. Use the same IP address on both, internal and external sides of the network.
- D. Use one Avaya Session Border Controller for Enterprise on the internal and external sides of the network.
Answer: B
Explanation:
Use the same interface mapping throughout! Examples in this section use:
NEW QUESTION # 21
How many Server Flows and/or Subscriber Flows are required for SIP Trunking?
- A. a minimum of two Subscriber Flows
- B. one Subscriber Flow and one Server Flow
- C. one Subscriber Flow and two Server Flows
- D. a minimum of two Server Flows
Answer: C
Explanation:
Two types of flows need to be defined for the proper routing of SIP messages from and to the endpoints and the SIP server.
Example, Server Flows:
NEW QUESTION # 22
Which configuration must be completed before configuring a TSAPI link on Avaya Aura Application Enablement Services (AES)?
- A. A CTI-user must be configured on Avaya Aura Application Enablement Services (AES) first.
- B. A Switch Connection must be configured on Avaya Aura Application Enablement Services (AES) first.
- C. A signaling-group must be configured on Avaya Aura Communication Manager (CM) first.
- D. A CTI link must be configured on Avaya Aura Communication Manager (CM) first.
Answer: D
Explanation:
If you are administering the AE Server for TSAPI, JTAPI, DMCC with Call Control, Telephony Web Service, or an AE Services integration (Microsoft or IBM Sametime), you must administer a CTI link from Communication Manager to AE Services.
Follow these steps from a Communication Manager SAT to administer a CTI link type ADJ-IP.
Procedure
1. Type add cti-link <link number>, for example add cti-link 5.
2. Complete the CTI LINK form as follows:
a. In the Extension field, type <station extension>, for example 70001.
b. In the Type field, type ADJ-IP.
c. In the Name field, type <name of AE Server>, for example aeserver1.
NEW QUESTION # 23
Which Avaya BreezeTM Cluster type is the Avaya Aura Presence Services snap-in installed on?
- A. Core Platform
- B. General Purpose
- C. Presence Services
- D. IM_Presence
Answer: A
Explanation:
Verifying that Presence Services snap-in is ready to support Presence and IM Procedure
1. On the System Manager web console, navigate to Elements > Avaya Breeze> Cluster Administration.
2. Locate the row for the cluster, and verify that:
* The Cluster Profile field shows Core Platform. etc.
NEW QUESTION # 24
When Avaya Aura Presence Services is implemented, which statement is true about Port Management?
- A. It allows multi-media services over a standard Web-Browser.
- B. It allows independent management capabilities to filter out undesired message to every Avaya Aura Presence Services user.
- C. It collects statistics about Port-Usage from each Presence-compatible endpoint across the network.
- D. Port 5222 is used for one-X Endpoints, while Port 5269 is open for connecting with other XMPP
3rd-Party Servers.
Answer: D
Explanation:
Port 5222: XMPP connection configuration
The Connection Manager runs by default when you install the XCP server. It is configured with a JSM Command Processor and two XMPP directors. The XMPP directors handle communication with IM clients. One of the directors is configured to use port 5222 and the other is configured to use port 5223 for secure communications.
Port 5269:Example Obtaining the Server-to-Server Port from an Openfire server Procedure
1. Log in to the Openfire Web console.
2. Click Server > Server Settings > Server to Server.
3. In the Service Enabled section, the Enabled check box should be checked, and the port value is contained in the box to the right of Remote servers can exchange packets with this server on port. By default the value is 5269, and it is recommended that this default value be maintained.
NEW QUESTION # 25
What should be verified before running the initTM -f command on the Command Line Interface of Avaya BreezeTM platform (formerly known as Engagement Development Platform (EDP))?
- A. Verify that a valid Certificate is installed on the Avaya BreezeTM instance.
- B. Verify that Avaya BreezeTM is licensed.
- C. Verify that an enrollment password is configured on System Manager and that it has not expired.
- D. Verify that Avaya BreezeTM is configured as a Managed Element in Avaya Aura System Manager.
Answer: C
Explanation:
See step 8 and step 9 below.
Repairing replication between Avaya BreezeTM and System Manager
Procedure
1. On the System Manager web console, navigate to Services > Replication.
2. In Replica Group column, click CollaborationEnvironment_3.1.
3. In Replica Node Host Name column, locate Avaya BreezeTM.
4. Verify that the status of the Synchronization Status field is green. If not, go to Step 5.
5. If Presence Services Snap-in has been deployed, in the Product column, verify that both Avaya BreezeTM and Presence Services are displayed.
6. Select Avaya BreezeTM, and click Repair.
7. After 2?5 minutes, verify that the status of the Synchronization Status field is green. If not, go to Step 8.
8. Verify that Enrollment Password is not expired.
a. Navigate to Services > Security.
b. In the navigation pane, click Certificates > Enrollment Password.
9. If the Enrollment Password is expired: a. Enter a password, and click Commit. It is highly recommended that the same password must be used. Otherwise, Avaya BreezeTM and Presence Services must be re-administered, because System Manager Enrollment Password was configured during deployment of Avaya BreezeTM.
a. Open an SSH session to the Avaya BreezeTM Management Module IP address as sroot.
b. On the command line interface, enter initTM -f.
c. When prompted for the enrollment password, enter the password that you provided in Step 9a.
d. Repeat Step 1 to Step 6.
NEW QUESTION # 26
After running the Install wizard on Avaya Session Border Controller for Enterprise (SBCE), you added a Public Outside IP address to the B1 interface. You try to ping this IP address from a PC in the same subnet but it falls. What would you do first to resolve the issue?
- A. Reboot SBCE.
- B. Restart Applications.
- C. Navigate to Device Specific Settings > Network Management > Interfaces and Enable the B1 interface.
- D. Set the Default Gateway router IP address, navigate to the Interfaces and Enable the B1 Interface.
Answer: C
Explanation:
1. The interface might need to be enabled.
2. Click on the Interface Configuration tab.
3. Click the Toggle link for both the A1 and the B1 interfaces.
The Administrative Status for both A1 and B1 changes to Enabled
NEW QUESTION # 27
The media stream in WebRTC is anchored on which Avaya Aura component?
- A. G650 Medpro
- B. Avaya Aura Media Server (AAMS)
- C. Avaya Aura Media Gateway G430/G450
- D. No DSP Resources are required
Answer: B
Explanation:
The Avaya WebRTC Snap-in enables users inside or outside the Enterprise to make a secure call from their web browser to any endpoint to which Avaya Aura can deliver calls. The WebRTC Snap-in supports 1800 simultaneous calls at a rate of 28,000 BHCC in the following deployment model:
1 Avaya Breeze server
1 Avaya Session Border Controller for Enterprise (Avaya SBCE) server
8 Avaya Aura Media Servers
NEW QUESTION # 28
Which statement about Avaya Aura Presence Services 7.x snap-in licensing is true?
- A. It requires an instance-license.
- B. It requires a per-user license.
- C. It does not require a license to work.
- D. It requires a license file for each snap-in installed.
Answer: C
Explanation:
Presence Services snap-in does not require a license to work.
NEW QUESTION # 29
How does the Avaya Aura Web Gateway with Spaces Calling support the scalability of communication systems?
- A. Through cloud-based services
- B. Through manual system adjustments
- C. By allowing on-premise server installations
- D. By limiting the number of users
Answer: A
NEW QUESTION # 30
What is the process for establishing a command line session to the AES Management IP Address, and logging in with the default account and default password?
- A. Use PuTTY to SSH to > AES Management IP Addr > using port 22, then enter login=craft password=crftpw.
- B. Use PuTTY to Rlogin to > AES Management IP Addr > using port 21, then enter login=admin password=admin.
- C. Use PuTTY to SSH to > AES Management IP Addr > using port 222, then enter login=admin password=admin01.
- D. Use PuTTY to SSH to > AES Management IP Addr > using port 22, then enter login=cust password=custpw.
Answer: A
Explanation:
Use port 22, not port 21 or port 222.
Log in as craft and use the default password.
NEW QUESTION # 31
An Avaya Aura Messaging (AAM) server intended to store Voice Messages in Avaya Message Store Mode, and you are configuring that server for integration with an Avaya Aura Core. In Messaging Administration > Server Settings > Server Role/AxC Address, which Server Role must be chosen at the "Roles for this server" field?
- A. AMSM
- B. Application Only
- C. Storage & Application
- D. Storage Only
Answer: C
NEW QUESTION # 32
To route calls to Avaya Aura Messaging (AAM), which routing strategy is used by Avaya Aura Session Manager (SM)?
- A. Automatic Alternate Routing (AAR)
- B. Network Routing Policies (NRP)
- C. Automatic Route Selection (ARS)
- D. Registry Routing
Answer: B
Explanation:
Routing policies describe the conditions under which Session Manager will route calls between Communication Manager and Avaya Aura Messaging.
NEW QUESTION # 33
You are starting the process to create a server certificate so it can be installed in the Avaya Session Border Controller (SBC). What must be done before creating a server certificate for SBC?
- A. Run initTM -d from SBC CLI.
- B. Generate a Certificate Signing Request (CSR) in SBC.
- C. Add End Entity in Session Manager.
- D. Download a CA PEM file from System Manager.
Answer: B
NEW QUESTION # 34
Avaya Aura Presence Services 7.x is implemented on Avaya BreezeTM (formerly Engagement Development Platform (EDP)). When looking at Elements > Breeze > Service Management > Services, which status would you expect for a Presence Services snap-in that is ready to support Avaya Aura Presence Services?
- A. Accepting
- B. Installed
- C. Loaded
- D. Active
Answer: A
NEW QUESTION # 35
In Avaya Session Border Controller for Enterprise (SBCE), what is the default state of an Interface?
- A. Enabled
- B. Disabled
- C. Active
- D. Deployed
Answer: B
Explanation:
Example:
Commission the SBC-SBC Configuration
1. The A1 and B1 interfaces display on the Network Configuration tab.
2. Click on the Interface Configuration tab:
3. Click the Toggle link for both the A1 and the B1 interfaces. The Administrative Status for both A1 and B1 changes to Enabled.
NEW QUESTION # 36
......
Get Special Discount Offer of 71301T Certification Exam Sample Questions and Answers: https://actualtest.updatedumps.com/AVAYA/71301T-updated-exam-dumps.html