Free PECB ISO-9001-Lead-Auditor Test Practice Test Questions Exam Dumps
Prepare Top PECB ISO-9001-Lead-Auditor Exam Audio Study Guide Practice Questions Edition
NEW QUESTION # 23
Match the process descriptions below to the process names:
Answer:
Explanation:
Explanation:
Match the process descriptions below to the process names:
The process by which the accuracy of test equipment is checked against a known standard. = Calibration The process by which a product or service is visually examined to determine conformity to requirements. = Evaluation The process by which data is examined in detail to reach a specific answer or answers. = Analysis The process by which a parameter of a product or service is examined to determine a specific value. = Measurement According to the ISO 9000:2015 - Quality management systems - Fundamentals and vocabulary, the definitions of the process names are as follows:
Calibration: operation that, under specified conditions, in a first step, establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and, in a second step, uses this information to establish a relation for obtaining a measurement result from an indication.
Evaluation: determination of the suitability, adequacy or effectiveness of an object to achieve established objectives.
Analysis: detailed examination of the elements or structure of something.
Measurement: process to experimentally obtain one or more quantity values that can reasonably be attributed to a quantity.
Therefore, the process descriptions can be matched to the process names based on these definitions.
References:
ISO 9000:2015 - Quality management systems - Fundamentals and vocabulary
NEW QUESTION # 24
Which two of the following are the key expected results of a quality management system that conforms to the requirements of ISO 9001:2015?
- A. Enhanced customer satisfaction
- B. Decreased number of management system nonconformities
- C. Increased profits
- D. Decreased number of nonconforming products in all stages of the manufacturing cycle
- E. Consistently provide products that meet customers' requirements
- F. Decreased number of warranty claims
Answer: A,E
Explanation:
According to the ISO 9001:2015 document, the key expected results of a quality management system that conforms to the requirements of ISO 9001:2015 are:
*the ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements;
*the enhancement of customer satisfaction.
These results are derived from the quality management principles of customer focus and process approach, which are the basis of the ISO 9000 family of standards1. Customer focus means understanding and meeting customer needs and expectations, as well as exceeding them when possible1. Process approach means managing activities as interrelated processes that function as a coherent system, which leads to consistent and predictable results1.
Therefore, the correct answer is C and F.
References: 2: ISO 9001:2015 - Quality management systems - Requirements 1: ISO - Quality management principles
NEW QUESTION # 25
Select six tasks you would expect to be completed at the audit team meeting of a third-party audit team leader and his audit team in preparation for a Closing meeting for a four-day initial certification audit.
- A. Audit team review any points raised by the auditee nominated representative.
- B. Audit team complete final version of their individual findings.
- C. Re-audit corrective actions taken to correct findings found during the audit.
- D. Audit team agree final audit outcome recommendation.
- E. Agree the roles of each audit team member for the closing meeting.
- F. Hold daily audit team meeting to review any timetable issues and potential findings and their impact on the audit for other team members.
- G. Write the audit finding report out when detected and obtain signature of the auditee.
- H. Audit team leader informs the individual(s) managing the audit programme that the closing meeting is ready to be held.
- I. Final audit team meeting to agree findings and categories including clarification of any uncertainties.
- J. Audit team leader completes final report, including individual findings and certification recommendation.
Answer: A,B,C,D,E,I
Explanation:
The tasks that are expected to be completed at the audit team meeting of a third-party audit team leader and his audit team in preparation for a Closing meeting for a four-day initial certification audit are:
*Option C: Final audit team meeting to agree findings and categories including clarification of any uncertainties. This option is correct because the audit team meeting is an opportunity for the audit team leader and the audit team members to review and consolidate the audit findings, to ensure that they are clear, accurate, objective, and supported by sufficient audit evidence. The audit team should also agree on the categories of the findings, such as nonconformity, observation, or opportunity for improvement, and resolve any uncertainties or disagreements among the audit team members.
*Option D: Agree the roles of each audit team member for the closing meeting. This option is correct because the audit team meeting is an opportunity for the audit team leader to assign the roles and responsibilities of each audit team member for the closing meeting, such as presenting the audit findings, answering questions, or taking notes. The audit team leader should also ensure that the audit team members are prepared and confident to perform their roles and to communicate effectively with the auditee.
*Option E: Audit team review any points raised by the auditee nominated representative. This option is correct because the audit team meeting is an opportunity for the audit team to review any points raised by the auditee nominated representative during the audit, such as requests for clarification, feedback, or complaints. The audit team should consider the validity and relevance of the points raised and decide how to address them in the closing meeting or in the audit report.
*Option F: Audit team agree final audit outcome recommendation. This option is correct because the audit team meeting is an opportunity for the audit team to agree on the final audit outcome recommendation, based on the audit findings and the audit criteria. The audit team should also consider the implications and consequences of the audit outcome recommendation for the auditee and the certification body, and ensure that the recommendation is consistent and justified.
*Option H: Audit team complete final version of their individual findings. This option is correct because the audit team meeting is an opportunity for the audit team to complete the final version of their individual findings, based on the agreement and feedback from the audit team meeting. The audit team should ensure that their individual findings are written in a clear, concise, and factual manner, and that they include the audit criteria, the audit evidence, and the audit conclusion. The audit team should also submit their individual findings to the audit team leader for review and approval.
*Option I: Re-audit corrective actions taken to correct findings found during the audit. This option is correct because the audit team meeting is an opportunity for the audit team to re-audit the corrective actions taken by the auditee to correct the findings found during the audit, if applicable and feasible. The audit team should verify the effectiveness and adequacy of the corrective actions and update the audit findings accordingly. The audit team should also document the results of the re-audit and communicate them to the auditee.
The following options are not correct:
*Option A: Audit team leader informs the individual(s) managing the audit programme that the closing meeting is ready to be held. This option is not correct because this task is not part of the audit team meeting, but part of the communication between the audit team leader and the individual(s) managing the audit programme. The audit team leader should inform the individual(s) managing the audit programme that the closing meeting is ready to be held after the audit team meeting, when the audit team has completed all the tasks and is ready to present the audit results to the auditee.
*Option B: Hold daily audit team meeting to review any timetable issues and potential findings and their impact on the audit for other team members. This option is not correct because this task is not part of the final audit team meeting, but part of the daily audit team meetings that are held during the audit. The daily audit team meetings are opportunities for the audit team to review the progress and performance of the audit, to identify and resolve any issues or problems, and to coordinate and adjust the audit plan and activities as needed.
*Option G: Audit team leader completes final report, including individual findings and certification recommendation. This option is not correct because this task is not part of the audit team meeting, but part of the audit reporting process. The audit team leader should complete the final report, including the individual findings and the certification recommendation, after the closing meeting, when the audit team has received and considered the feedback and comments from the auditee. The audit team leader should also ensure that the final report is reviewed and approved by the appropriate authorities before issuing it to the auditee and the certification body.
*Option J: Write the audit finding report out when detected and obtain signature of the auditee. This option is not correct because this task is not part of the audit team meeting, but part of the audit evidence collection and documentation process. The audit team should write the audit finding report out when detected and obtain the signature of the auditee during the audit, when the audit team has observed and verified the audit evidence and has communicated the audit finding to the auditee. The signature of the auditee does not indicate acceptance or agreement with the audit finding, but only acknowledgement of receipt.
References:
*ISO 19011:2018 Guidelines for auditing management systems, Clause 6.4.2: Conducting audit activities, Subclause i) and j)
*ISO 9001 Lead Auditor Course Material, Module 5: Conducting an Audit, Slide 19: Audit Team Meeting
*ISO 9001 Lead Auditor Training Course - IRCA Certified, Section 5.4: Audit Team Meeting
*Lead Auditor Exam Preparation Guide (EPG) Template - PECB, Section 3.2: Exam Content Outline, Subsection 3.2.1: Section 1 - Audit Fundamentals, Subsection 3.2.2: Section 2 - Audit Principles, Subsection
3.2.3: Section 3 - Audit Process, Subsection 3.2.4: Section 4 - Audit Competencies
NEW QUESTION # 26
You are carrying out an annual audit at an organisation that offers home security services. You are interviewing the Quality Manager (QM) You: "Would you tell me about your management review process?" QM: "The senior management team plans to review the management system every six months. The review follows a set agenda and records are maintained." You: "May I see the records from the last two management reviews?" Narrative: The Quality Manager gives you the latest record, which shows the last management review took place nine months ago.
The Quality Manager then gives you the previous management review record, which took place one year before the latest review.
You: "Are there any other review reports in the last two years?
QM: "No, these are the only ones."
Answer:
Explanation:
Explanation:
Nonconformity report
ISO 9001 Clause Number: 9.3.1 Nature of problem: Management review has not been conducted at the defined frequency. ISO 9001 requirement that has not been fulfilled: ISO 9001 - "Top management shall review the organization's quality management system at planned intervals." Evidence: The last management review took place nine months ago, and the previous one took place one year before the latest review. The planned interval is six months.
NEW QUESTION # 27
You are carrying out an audit at a single-site organisation seeking certification to ISO 9001 for the first time.
The organisation offers warehousing and export services to customers. Customers are invoiced for the time stock items are stored in the warehouse. Transport to and from the warehouse is controlled by the organisation and approved subcontract transport services are used. The organization does not have its own transport vehicles. Stock items are not purchased by the organisation.
You have gathered audit evidence as outlined in the table. Match the ISO 9001 Clause 8 extract to the audit evidence.
Answer:
Explanation:
Explanation:
The table below shows the possible matching of the ISO 9001 Clause 8 extract to the audit evidence.
Table
Audit evidence
ISO 9001 Clause 8 extract
Four of the 10 pallets of stock sampled in the warehouse were not labelled.
"8.5.2 ... shall use suitable means to identify outputs ..."
A damaged pallet of stock seen in the quarantine area was leaking liquid onto the floor.
"8.7.1 ... shall ensure that outputs that do not conform to their requirements are identified and controlled ..." One of the fork-lift truck drivers had no fork-lift truck driving licence.
"8.5.1 e ... shall include, as applicable ... the appointment of competent persons ..." There was no pest control provision in the warehouse.
"8.5.4 ... shall preserve the outputs during production and service provision ..." Two pallets of temperature-sensitive stock items were being stored at ambient as the chilled storage facility was full.
"8.1 ... shall plan, implement and control the processes ..."
NEW QUESTION # 28
Select the term that best describes the purpose of retaining documented information in a quality management system to ISO 9001.
- A. To safeguard the integrity of the quality management system.
- B. To provide confidence in the effectiveness of the quality management system.
- C. To facilitate auditing for proof of conformity to the standard.
- D. To support the operation of the processes of the quality management system.
Answer: D
Explanation:
Documented information is a means by which an organization demonstrates compliance. It communicates what we do and how we do things, it communicates what happened and what results were achieved. It is, essentially, a tool for communication. ISO 9001:2015 allows an organization flexibility in the way it chooses to document its quality management system (QMS). This enables each individual organization to determine the correct amount of documented information needed in order to demonstrate the effective planning, operation and control of its processes and the implementation and continual improvement of the effectiveness of its QMS. The standard states that the organization shall maintain documented information to the extent necessary to support the operation of processes and retain documented information to the extent necessary to have confidence that the processes are being carried out as planned. Therefore, the purpose of retaining documented information is to support the operation of the processes of the QMS, not to facilitate auditing, provide confidence or safeguard integrity, which are secondary benefits of documented information.
References: Guidance on the requirements for Documented Information of ISO 9001:2015, ISO 9001:2015 documented information | CQI | IRCA, Documented Information Required by ISO 9001:2015 - 9000 Store
NEW QUESTION # 29
You work as an external quality consultant for an organisation, 'A', which provides packaged food to the public. You are asked to lead a team (you as the leader and two other auditors) to audit a supplier, 'B', to ISO
9001 which provides packaging materials to your organisation. It is 4 pm and the audit is close to an end; you are having an internal meeting with the team to decide what will be presented to the auditee during the Closing meeting. The Closing meeting was scheduled at 5 pm.
You, as Audit Team Leader, audited top management. You explain to the audit team that you identified two nonconformities:
a. There is no documented information on Top Management Reviews, as required in clause 9.3 of ISO
9001:2015.
b. There is no evidence of Top Management Commitment as required in clause 5.1 of ISO 9001:2015. (e.g., not ensuring the availability of resources to operate the QMS, not ensuring the establishment of objectives, no promotion of improvement, no promotion of the process approach).
All agreed to present these two nonconformities. They went to meet the Top Management of 'B' and noticed that the General Manager and three other managers (Production, Human Resources, and Sales) were present in the meeting room.
Considering the seriousness of the two nonconformities to Top Management, as audit team leader, from the following select the best option:
- A. Present the nonconformities to the managers, inform them that the report will be sent within 10 days, close the meeting and leave the site.
- B. Present the nonconformities to the whole group and inform that you will recommend your company to remove them from the approved suppliers list.
- C. Ask the General Manager to have a private conversation in which you present the nonconformities only to him because of their sensitive nature.
- D. Present the nonconformities to the whole group and analyse with them how to overcome this situation.
Answer: D
Explanation:
According to the guidance on conducting the audit closing meeting1, the audit team leader should provide a summary of the audit findings and conclusions, invite discussions, and agree on timelines for any corrective actions. The audit team leader should also be respectful, constructive, and objective when presenting the nonconformities, and avoid any personal or emotional comments. The audit team leader should also consider the impact of the disruptive event (such as the Covid-19 pandemic) on the auditee's context, interested parties, and risks2, and acknowledge any good practices or improvements observed during the audit. Therefore, option D is the best option, as it follows the best practices for the closing meeting and allows the auditee to understand the nonconformities and their implications, and to participate in the analysis and resolution of the issues. Option A is not correct, as it is not respectful, constructive, or objective, and it does not invite any discussion or feedback from the auditee. It also assumes that the audit team leader has the authority to recommend the removal of the supplier from the approved list, which may not be the case. Option B is not correct, as it does not provide enough information or explanation to the auditee, and it does not allow any discussion or feedback from the auditee. It also does not follow the best practices for the closing meeting, such as providing a summary of the audit, acknowledging any good practices, and agreeing on timelines for corrective actions. Option C is not correct, as it does not involve the other managers who are responsible for the functions or processes that were audited, and who may have valuable input or information to share. It also does not follow the best practices for the closing meeting, such as providing a summary of the audit, inviting discussions, and agreeing on timelines for corrective actions. References: 1: Conducting the Audit Closing Meeting: Sharing the Results2: Auditing ISO 9001:2015 in the Context of a Disruptive Event.
NEW QUESTION # 30
Which two of the following should be included in an audit plan?
- A. Date of next audit
- B. Signature of Certification Body Technical Reviewer
- C. Name of the auditee general manager
- D. Sequence and timings of audit activities
- E. Name of auditees and auditors
- F. List of findings from the last audit
Answer: D,E
Explanation:
According to ISO 19011:2018, clause 6.3.2, an audit plan should include the following information:
The audit objectives, scope, and criteria
The audit team members and their roles and responsibilities
The audit schedule, including the sequence and timings of audit activities, such as opening meeting, document review, interviews, observations, closing meeting, etc.
The expected time and duration of each audit activity and location
The name and contact details of the auditee's representative and other relevant parties The allocation of appropriate resources to support the audit activities The audit methods and techniques to be used, such as interviews, observations, sampling, etc.
The audit documents and records to be prepared and retained
The audit language and communication methods
The audit risks and opportunities and how to address them
The audit follow-up arrangements, if applicable
Therefore, the correct answer is D and F, as they are essential elements of an audit plan. The other options are either irrelevant or optional for an audit plan. References:
ISO 19011:2018(en), Guidelines for auditing management systems, clause 6.3.2 ISO 19011: Guidelines for Auditing Management Systems | ASQ, section "Making audit arrangements" ISO 19011 Management Systems Audit Checklist | Process Street, task 6.3.2
NEW QUESTION # 31
During a second-party audit of a dairy farm (by a potential customer) complying with ISO 9001:2015, the auditor verifies that there is large variability in the daily production of the milking yard. The current agreement with their only customer is to provide 2,000 litres per day. However, in the last two years, they have noticed an increasing variability in daily production.
If they produce less than 2,000 litres, they are penalised with a fine of 1.5 pesos for every litre that they do not provide. If they produce more than 2,000 litres, they use the extra milk to feed the pigs.
This process has been in operation for decades. The dairy farm was founded by the grandfather of the current owners, who did not want to alter the established practices.
The auditor raises a nonconformity on the basis that the process is not under control (Clause 8.1).
If you had been the auditor, which one of the following actions would you have accepted?
- A. Retain the current contract and try to sell the occasional surplus milk to a second customer.
- B. Modify the contract with the current customer to provide them with only 1,500 litres of milk per day and make an agreement with a second customer.
- C. Analyse the daily dispatch of milk for 7 days to determine its variability.
- D. Apply the existing process of addressing the risks and opportunities of milk production.
Answer: D
Explanation:
The action that the auditor would have accepted is:
*Option B: Apply the existing process of addressing the risks and opportunities of milk production. This option is correct because ISO 9001:2015 clause 8.1 requires the organization to plan, implement and control the processes needed to meet the requirements for the provision of products and services, and to implement actions determined in clause 6.1, which refers to the actions to address risks and opportunities. The organization should apply the existing process of addressing the risks and opportunities of milk production, which may include identifying the sources of variability, assessing the potential impacts and consequences, determining and implementing appropriate actions to reduce or eliminate the variability, monitoring and measuring the effectiveness of the actions, and reviewing and updating the actions as necessary.
The following options are not correct:
*Option A: Modify the contract with the current customer to provide them with only 1,500 litres of milk per day and make an agreement with a second customer. This option is not correct because it does not address the root cause of the variability in the daily production of the milking yard, which may affect the quality and consistency of the products and services provided by the organization. It also does not demonstrate the organization's commitment to meet the customer and applicable statutory and regulatory requirements, as required by ISO 9001:2015 clause 8.2.2.
*Option C: Retain the current contract and try to sell the occasional surplus milk to a second customer. This option is not correct because it does not address the root cause of the variability in the daily production of the milking yard, which may affect the quality and consistency of the products and services provided by the organization. It also does not demonstrate the organization's commitment to meet the customer and applicable statutory and regulatory requirements, as required by ISO 9001:2015 clause 8.2.2.
*Option D: Analyse the daily dispatch of milk for 7 days to determine its variability. This option is not correct because it does not address the root cause of the variability in the daily production of the milking yard, which may affect the quality and consistency of the products and services provided by the organization. It also does not demonstrate the organization's commitment to implement actions to address risks and opportunities, as required by ISO 9001:2015 clause 8.1.
References:
*ISO 9001:2015 Quality management systems - Requirements, Clause 8: Operation, Subclause 8.1:
Operational planning and control, Subclause 8.2: Requirements for products and services
*ISO 9001 Lead Auditor Course Material, Module 4: ISO 9001:2015 Requirements, Slide 23: Clause 8 - Operation
*ISO 9001 Lead Auditor Training Course - IRCA Certified, Section 4.2: ISO 9001:2015 Requirements, Subsection 4.2.8: Clause 8 - Operation
*Lead Auditor Exam Preparation Guide (EPG) Template - PECB, Section 3.2: Exam Content Outline, Subsection 3.2.1: Section 1 - Audit Fundamentals, Subsection 3.2.2: Section 2 - Audit Principles, Subsection
3.2.3: Section 3 - Audit Process, Subsection 3.2.4: Section 4 - Audit Competencies
NEW QUESTION # 32
You are an auditor from a construction organisation who is conducting a second party audit to ISO 9001 at a steel rolling mill producing structural steelwork. When auditing the rolling process, you find that the operator who is unloading the furnace does not use the adjacent infrared pyrometer to measure the appropriate product temperature in readiness for the next production stage.
You: "How do you tell when the billet is ready for the rolling stage?"
Operator: "I've done this job for 20 years. I can tell by the bright red colour." You: "What happens if the colour is wrong?" Operator: "The billet goes back into the furnace." You: "Is the pyrometer ever used?" Operator: "Only in borderline cases." You continue to interview the operator and find that around 25% of the billets are sent back to the furnace.
This includes 80% of the borderline cases.
Select three options that would provide evidence of conformance with clause 9.1.1 of ISO 9001.
- A. A quality objective to achieve lower recycle rates for billets.
- B. Annual review records for furnace operators.
- C. Planning for monitoring and measuring the billet temperature.
- D. Periodic analysis of the results of temperature checks.
- E. A procedure that provides instruction in taking billet temperature.
- F. An increase in the use of the pyrometer by operators.
- G. Certification of conformance to national standards from the manufacture of the pyrometer.
- H. Maintenance plan for the furnace.
Answer: C,D,E
Explanation:
According to ISO 9001:2015, clause 9.1.1, the organization is required to determine what needs to be monitored and measured, the methods for monitoring, measurement, analysis and evaluation, as applicable, to ensure valid results, and when the monitoring and measuring shall be performed. The organization is also required to retain appropriate documented information as evidence of the results.
Therefore, in the scenario given, the organization should have planned for monitoring and measuring the billet temperature, as it is a critical factor for the quality of the product and the process. The organization should also have established a procedure that provides instruction in taking billet temperature, using the pyrometer or other suitable methods, to ensure consistency and accuracy. The organization should also have performed periodic analysis of the results of temperature checks, to identify trends, problems, and opportunities for improvement.
Hence, the options that would provide evidence of conformance with clause 9.1.1 of ISO 9001 are A, E, and F, as they are aligned with the requirements of the clause. The other options are either irrelevant or not directly related to clause 9.1.1, as they do not pertain to the monitoring and measurement of the billet temperature.
References:
ISO 9001:2015(en), Quality management systems - Requirements, clause 9.1.1 ISO 19011:2018(en), Guidelines for auditing management systems, clause 6.4.4 and 6.7.2 ISO 9001 Lead Auditor Training Course | IRCA Certified | BSI, section "Learning objectives" ISO 9001 Lead Auditor Course Material | 3FOLD Education Centre, module 5 and 6
NEW QUESTION # 33
Select the words that best complete the sentence:
Answer:
Explanation:
Explanation:
According to the ISO 19011:2018 document, the audit plan should provide the basis for agreement regarding the conduct and scheduling of the audit activities. The amount of detail provided in the audit plan should reflect the scope and complexity of the audit, as well as the risk of not achieving the audit objectives1. The scope of the audit refers to the extent and boundaries of the audit, such as the audit criteria, the audit objectives, the organizational and functional units, and the processes to be audited1. The complexity of the audit refers to the degree of difficulty or intricacy of the audit, such as the number and diversity of the auditees, the audit criteria, the audit methods, and the audit team composition2. The risk of not achieving the audit objectives refers to the possibility that the audit may fail to provide reliable and sufficient audit evidence to support the audit conclusions and report1.
Therefore, the complete sentence is:
In the context of a third-party audit, the amount of detail provided in the audit plan should reflect the scope and complexity of the audit, as well as the risk of not achieving the audit objectives.
References: 1: ISO 19011:2018 - Guidelines for auditing management systems 2: Audit Complexity - an overview | ScienceDirect Topics
NEW QUESTION # 34
The following are stages of an audit, put them in the order they would be conducted.
Answer:
Explanation:
Explanation:
Establishing the audit programme objectives
Determining and evaluating the audit programme risks and opportunities
Establishing the audit programme
Initiating the audit
Preparing all audit activity
Conducting the audit activities
According to ISO 19011:2018, clause 5, the audit programme is a set of one or more audits planned for a specific time frame and directed towards a specific purpose. The audit programme includes all activities necessary to plan, organize, and conduct the audits. The audit programme management involves the following steps1:
Establishing the audit programme objectives: The audit programme objectives define the intended outcomes of the audit programme, such as verifying conformity, evaluating performance, identifying improvement opportunities, etc. The audit programme objectives should be aligned with the strategic direction and policies of the organization and the needs and expectations of the interested parties.
Determining and evaluating the audit programme risks and opportunities: The audit programme risks and opportunities are the factors that can affect the achievement of the audit programme objectives, such as changes in the internal or external context, availability of resources, competence of auditors, etc. The audit programme risks and opportunities should be identified, analyzed, and evaluated to determine the appropriate actions to address them.
Establishing the audit programme: The audit programme is established by defining the audit programme scope, criteria, methods, and resources. The audit programme scope defines the extent and boundaries of the audit programme, such as the processes, functions, sites, activities, etc. that will be audited. The audit programme criteria are the set of policies, procedures, or requirements used as a reference for the audits. The audit programme methods are the techniques used to conduct the audits, such as interviews, observations, document review, sampling, etc. The audit programme resources are the human, technical, and financial resources needed to implement the audit programme.
Initiating the audit: The audit initiation is the process of formally establishing the arrangements for an individual audit within the audit programme. The audit initiation involves contacting the auditee and the audit client, confirming the audit objectives, scope, and criteria, and obtaining the necessary information and access for the audit.
Preparing all audit activity: The audit preparation is the process of developing the audit plan and the audit work documents for an individual audit. The audit plan is a document that provides the basis for agreement regarding the conduct of the audit, such as the audit schedule, the audit team, the audit methods, the audit language, the audit report, etc. The audit work documents are the records that provide evidence of the audit activities, such as the audit checklist, the audit notes, the audit findings, etc.
Conducting the audit activities: The audit activities are the processes of collecting and verifying audit evidence and evaluating it against the audit criteria to make the audit conclusions. The audit activities include the opening meeting, the communication during the audit, the roles and responsibilities of the audit team and the auditee, the audit evidence collection and verification, the audit findings generation and recording, the closing meeting, and the audit report preparation and distribution.
References: ISO 19011:2018(en), Guidelines for auditing management systems
NEW QUESTION # 35
In a third-party audit to ISO 9001, select two options of when the organisation is required to act in response to reported findings.
- A. A recommendation is given in the report.
- B. A finding of good practice is reported.
- C. A major non-conformity is raised.
- D. A minor non-conformity is raised.
- E. An opportunity for improvement is raised.
- F. A finding of conformity is reported.
Answer: C,D
Explanation:
According to ISO 19011:2018, clause 6.6.2, a nonconformity is the non-fulfilment of a requirement. A nonconformity can be classified as either major or minor, depending on the nature and extent of the deviation from the audit criteria. A major nonconformity is a nonconformity that affects the ability or the integrity of the organization's management system to achieve the intended results. A minor nonconformity is a nonconformity that does not affect the ability or the integrity of the organization's management system to achieve the intended results, but is a deviation from the audit criteria1.
According to ISO/IEC 17021-1:2015, clause 9.4.9, the organization is required to analyze the cause and describe the specific correction and corrective actions taken, or planned to be taken, to eliminate detected nonconformities, within a defined time. The organization is also required to provide the certification body with records and evidence of the implementation and effectiveness of the correction and corrective actions taken.
The certification body will then verify the correction and corrective actions taken by the organization and decide on the certification status2.
Therefore, the two options of when the organization is required to act in response to reported findings are D and F, as they indicate the presence of nonconformities that need to be corrected and prevented from recurring.
The other options are not correct, as they do not require the organization to act in response to reported findings:
*A. A recommendation is given in the report: A recommendation is a suggestion for improvement that is not related to a nonconformity. A recommendation is not binding for the organization and does not affect the certification status. The organization may choose to accept or reject the recommendation, but it is not required to act on it.
*B. A finding of good practice is reported: A finding of good practice is a positive observation that indicates a strength or a best practice of the organization's management system. A finding of good practice is not related to a nonconformity and does not affect the certification status. The organization may choose to acknowledge or share the finding of good practice, but it is not required to act on it.
*C. An opportunity for improvement is raised: An opportunity for improvement is a potential area where the organization's management system can be enhanced or optimized. An opportunity for improvement is not related to a nonconformity and does not affect the certification status. The organization may choose to pursue or ignore the opportunity for improvement, but it is not required to act on it.
*E. A finding of conformity is reported: A finding of conformity is a confirmation that the organization's management system fulfils the audit criteria. A finding of conformity is not related to a nonconformity and does not affect the certification status. The organization may choose to celebrate or communicate the finding of conformity, but it is not required to act on it.
References: ISO 19011:2018(en), Guidelines for auditing management systems, ISO/IEC 17021-1:2015(en), Conformity assessment - Requirements for bodies providing audit and certification of management systems
- Part 1: Requirements
NEW QUESTION # 36
Select six of the activities that are specifically required by ISO 17021-1 as part third-party (Certification Body) surveillance audit processes.
- A. Review the status of previously raised findings and audit effectiveness of any outstanding findings.
- B. Confirm effectiveness of internal audit and management review.
- C. Failing to meet financial responsibilities.
- D. Complete a full document review of the quality management system.
- E. Verify legal compliance.
- F. Audit use of certification marks on marketing materials.
- G. Conduct a minimum number of annual surveillance audits during the certification period.
- H. Handling of customer complaints since last visit.
- I. Review the calibration status of the instrumentation.
- J. Review changes to the QMS since last visit.
Answer: A,B,E,F,H,J
Explanation:
The activities that are specifically required by ISO 17021-1 as part of third-party (Certification Body) surveillance audit processes are:
*Option A: Audit use of certification marks on marketing materials. This option is correct because ISO
17021-1:2015 clause 9.6.2.2 requires the certification body to audit the client's use of marks and/or any other reference to certification, as applicable, to ensure conformity with the certification requirements.
*Option B: Review changes to the QMS since last visit. This option is correct because ISO 17021-1:2015 clause 9.6.2.2 requires the certification body to review any changes affecting the client's quality management system and its ability to continue to fulfil the requirements of the standard used for certification.
*Option C: Confirm effectiveness of internal audit and management review. This option is correct because ISO
17021-1:2015 clause 9.6.2.2 requires the certification body to confirm the continuing effectiveness of the client's quality management system, including the effectiveness of the internal audit and management review processes.
*Option F: Review the status of previously raised findings and audit effectiveness of any outstanding findings.
This option is correct because ISO 17021-1:2015 clause 9.6.2.2 requires the certification body to review the status of findings and any corrective actions taken by the client in response to previous audits, and to verify the effectiveness of the implemented corrective actions.
*Option H: Verify legal compliance. This option is correct because ISO 17021-1:2015 clause 9.6.2.2 requires the certification body to verify the client's compliance with applicable statutory and regulatory requirements related to the scope of certification.
*Option I: Handling of customer complaints since last visit. This option is correct because ISO 17021-1:2015 clause 9.6.2.2 requires the certification body to review the client's handling of customer complaints related to the certified activities since the last audit.
The following options are not correct:
*Option D: Complete a full document review of the quality management system. This option is not correct because ISO 17021-1:2015 clause 9.6.2.2 does not require the certification body to complete a full document review of the quality management system during surveillance audits. A full document review is only required during the initial certification audit or when there are significant changes to the quality management system or the certification requirements.
*Option E: Failing to meet financial responsibilities. This option is not correct because ISO 17021-1:2015 clause 9.6.2.2 does not require the certification body to audit the client's financial responsibilities during surveillance audits. The certification body may have contractual arrangements with the client regarding the payment of fees, but this is not part of the surveillance audit process.
*Option G: Review the calibration status of the instrumentation. This option is not correct because ISO
17021-1:2015 clause 9.6.2.2 does not require the certification body to review the calibration status of the instrumentation during surveillance audits. The certification body may audit the client's monitoring and measuring resources as part of the quality management system requirements, but this is not a specific activity required by ISO 17021-1.
*Option J: Conduct a minimum number of annual surveillance audits during the certification period. This option is not correct because ISO 17021-1:2015 clause 9.6.2.2 does not require the certification body to conduct a minimum number of annual surveillance audits during the certification period. The certification body may determine the frequency and duration of surveillance audits based on the risk and performance of the client, but this is not a specific activity required by ISO 17021-1.
References:
*ISO 17021-1:2015 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1: Requirements
*ISO 9001 Lead Auditor Course Material, Module 7: Audit Follow-up and Surveillance, Slide 8: Surveillance Audit
*ISO 9001 Lead Auditor Training Course - IRCA Certified, Section 7.2: Audit Follow-up and Surveillance
*Lead Auditor Exam Preparation Guide (EPG) Template - PECB, Section 3.2: Exam Content Outline, Subsection 3.2.1: Section 1 - Audit Fundamentals, Subsection 3.2.2: Section 2 - Audit Principles, Subsection
3.2.3: Section 3 - Audit Process, Subsection 3.2.4: Section 4 - Audit Competencies
NEW QUESTION # 37
An internal auditor of a manufacturer of polystyrene packaging products for the electronics industry raised a nonconformity against section 10.3 of ISO 9001 in Report IA202. The nonconformity (NC 3) stated:
"The reject rate of the finished product of 9.7% needs improvement as it doesn't meet the stated objective of top management of 5%." As the third-party auditor reviewing the internal audit process, you come across the nonconformity. For corrective action, the Quality Manager conducted an investigation into the reject rates. He reported that the collection baskets for products ejecting from the moulding machines were not large enough. About 6% of products fell onto the wet and dirty factory floor. Management stated that replacing the baskets was too costly and ordered the Maintenance Manager to ensure that the floor was kept clean and dry to prevent rejects. The auditor later checked the factory floor, which was wet and dirty in places.
From the following nonconformities, select three that the auditor could raise to ISO 9001.
- A. 7.1.1 - The organisation failed to provide the required resources to prevent nonconforming products.
- B. 10.3 - The organisation did not continuously improve. Reject rates were unchanged.
- C. 8.6 - Dirty products were released to the customer.
- D. 7.3 - Staff were not aware that products were falling onto the factory floor.
- E. 9.2.2 - Report IA202 contained a poorly worded nonconformity (NC 3).
- F. 7.1.4 - The factory environment is not suitably maintained to prevent dirty products.
- G. 10.2.1 - Conduct of an investigation was not sufficient to understand the cause of the nonconformity.
- H. 8.5.1 - Production operations were not properly controlled to avoid reject products.
Answer: A,B,F
Explanation:
The auditor could raise the following nonconformities to ISO 9001 based on the scenario:
*Option A: 10.3 - The organisation did not continuously improve. Reject rates were unchanged. This option is correct because ISO 9001:2015 clause 10.3 requires the organization to improve the suitability, adequacy and effectiveness of the quality management system. The organization did not demonstrate any improvement in reducing the reject rate of the finished product, which was a stated objective of top management. The corrective action taken by the organization was not effective in addressing the root cause of the problem and preventing its recurrence.
*Option B: 7.1.4 - The factory environment is not suitably maintained to prevent dirty products. This option is correct because ISO 9001:2015 clause 7.1.4 requires the organization to determine, provide and maintain the environment necessary for the operation of its processes and to achieve conformity of products and services.
The organization did not ensure that the factory floor was clean and dry, which affected the quality of the products and increased the risk of nonconformity.
*Option C: 7.1.1 - The organization failed to provide the required resources to prevent nonconforming products. This option is correct because ISO 9001:2015 clause 7.1.1 requires the organization to determine and provide the resources needed for the establishment, implementation, maintenance and continual improvement of the quality management system. The organization did not provide adequate collection baskets for the products ejecting from the moulding machines, which resulted in products falling onto the factory floor and becoming nonconforming.
The following options are not correct:
*Option D: 9.2.2 - Report IA202 contained a poorly worded nonconformity (NC 3). This option is not correct because ISO 9001:2015 clause 9.2.2 does not specify the requirements for the wording of nonconformities in internal audit reports. The nonconformity (NC 3) stated by the internal auditor was clear and relevant to the audit criteria and audit evidence. The issue is not with the report, but with the corrective action taken by the organization.
*Option E: 8.6 - Dirty products were released to the customer. This option is not correct because ISO
9001:2015 clause 8.6 requires the organization to implement planned arrangements, at appropriate stages, to verify that the product and service requirements have been met. The scenario does not indicate that the dirty products were released to the customer, but that they were recalled and repaired then returned to the customers. The issue is not with the release, but with the production process and the environment.
*Option F: 7.3 - Staff were not aware that products were falling onto the factory floor. This option is not correct because ISO 9001:2015 clause 7.3 requires the organization to ensure that the persons doing work under its control are aware of the quality policy, relevant quality objectives, their contribution to the effectiveness of the quality management system, and the implications of not conforming with the quality management system requirements. The scenario does not indicate that the staff were not aware of these aspects, but that the management did not provide adequate resources and environment for the staff to perform their work. The issue is not with the awareness, but with the management responsibility and resource provision.
*Option G: 10.2.1 - Conduct of an investigation was not sufficient to understand the cause of the nonconformity. This option is not correct because ISO 9001:2015 clause 10.2.1 requires the organization to react to the nonconformity and, as applicable, take action to control and correct it and deal with the consequences. The scenario indicates that the Quality Manager conducted an investigation into the reject rates and identified the cause of the nonconformity. The issue is not with the investigation, but with the corrective action taken by the management.
*Option H: 8.5.1 - Production operations were not properly controlled to avoid reject products. This option is not correct because ISO 9001:2015 clause 8.5.1 requires the organization to implement production and service provision under controlled conditions. The scenario indicates that the production operations were controlled by the moulding machines, which ejected the products into the collection baskets. The issue is not with the production operations, but with the size of the collection baskets and the condition of the factory floor.
References:
*ISO 9001:2015 Quality management systems - Requirements
*ISO 9001 Lead Auditor Course Material, Module 6: Reporting Audit Findings, Slide 14: Writing Nonconformity Statements
*ISO 9001 Lead Auditor Training Course - IRCA Certified, Section 6.2: Reporting Audit Findings
*Lead Auditor Exam Preparation Guide (EPG) Template - PECB, Section 3.2: Exam Content Outline, Subsection 3.2.1: Section 1 - Audit Fundamentals, Subsection 3.2.2: Section 2 - Audit Principles, Subsection
3.2.3: Section 3 - Audit Process, Subsection 3.2.4: Section 4 - Audit Competencies
NEW QUESTION # 38
You have been nominated audit team leader of a third-party audit. Which of the following could be the two most relevant objectives of this audit?
- A. Identify opportunities for improvement
- B. Evaluate the satisfaction interested parties
- C. Evaluate the capability of the management system to establish and achieve objectives
- D. Evaluate the benefits obtained since the implementation of the management system
- E. Evaluate the effectiveness of the management system
- F. Identify the need of resources
Answer: C,E
NEW QUESTION # 39
Select the term that best describes the purpose of retaining documented information in a quality management system to ISO 9001.
- A. To safeguard the integrity of the quality management system.
- B. To provide confidence in the effectiveness of the quality management system.
- C. To facilitate auditing for proof of conformity to the standard.
- D. To support the operation of the processes of the quality management system.
Answer: D
Explanation:
Documented information is a means by which an organization demonstrates compliance. It communicates what we do and how we do things, it communicates what happened and what results were achieved. It is, essentially, a tool for communication. ISO 9001:2015 allows an organization flexibility in the way it chooses to document its quality management system (QMS). This enables each individual organization to determine the correct amount of documented information needed in order to demonstrate the effective planning, operation and control of its processes and the implementation and continual improvement of the effectiveness of its QMS. The standard states that the organization shall maintain documented information to the extent necessary to support the operation of processes and retain documented information to the extent necessary to have confidence that the processes are being carried out as planned. Therefore, the purpose of retaining documented information is to support the operation of the processes of the QMS, not to facilitate auditing, provide confidence or safeguard integrity, which are secondary benefits of documented information.
References: Guidance on the requirements for Documented Information of ISO 9001:2015, ISO 9001:2015 documented information | CQI | IRCA, Documented Information Required by ISO 9001:2015 - 9000 Store
NEW QUESTION # 40
Which two of the following auditors would not participate in a first-party audit?
- A. An auditor trained in-house
- B. An auditor from an interested party
- C. An auditor trained in the IRCA scheme
- D. An auditor from a customer
- E. An auditor certified by IRCA
- F. An auditor employed by an external consultancy organisation
Answer: D,F
Explanation:
A first-party audit is an internal audit conducted by auditors who are employed by the organization being audited but who have no vested interest in the audit results of the area being audited1. The purpose of a first-party audit is to assess the conformity of the organization's quality management system to the requirements of ISO 9001 and to identify opportunities for improvement2. Therefore, the two auditors who would not participate in a first-party audit are:
*A. An auditor employed by an external consultancy organization: This auditor is not employed by the organization being audited, and therefore does not qualify as a first-party auditor. This auditor may be hired to conduct a second-party audit (if the external consultancy organization is a customer or supplier of the organization being audited) or a third-party audit (if the external consultancy organization is a certification body or registrar).
*F. An auditor from a customer: This auditor is not employed by the organization being audited, and therefore does not qualify as a first-party auditor. This auditor may be hired to conduct a second-party audit, as a customer is an interested party that has specific requirements for the organization being audited.
The other options are not correct, as they could participate in a first-party audit, as long as they are employed by the organization being audited and have no vested interest in the audit results of the area being audited:
*B. An auditor from an interested party: This auditor could be a first-party auditor, as long as the interested party is within the organization being audited. For example, an auditor from the finance department could audit the production department, as long as they are not involved in the production process or affected by its outcomes.
*C. An auditor trained in-house: This auditor could be a first-party auditor, as long as they are employed by the organization being audited and have no vested interest in the audit results of the area being audited. The source of the auditor's training is not relevant for determining the type of audit, as long as the auditor is competent and qualified to perform the audit.
*D. An auditor trained in the IRCA scheme: This auditor could be a first-party auditor, as long as they are employed by the organization being audited and have no vested interest in the audit results of the area being audited. The IRCA scheme is a professional certification scheme for auditors of management systems, which provides recognition of the auditor's competence and credibility3. However, being trained in the IRCA scheme does not determine the type of audit, as long as the auditor is competent and qualified to perform the audit.
*E. An auditor certified by IRCA: This auditor could be a first-party auditor, as long as they are employed by the organization being audited and have no vested interest in the audit results of the area being audited. Being certified by IRCA means that the auditor has met the requirements of the IRCA scheme and has demonstrated their competence and credibility as an auditor of management systems3. However, being certified by IRCA does not determine the type of audit, as long as the auditor is competent and qualified to perform the audit.
References: First Party Audits: The 5 Steps to Success - Sync Resource Inc, ISO 9001 Auditing Practices Group, IRCA - International Register of Certificated Auditors
NEW QUESTION # 41
Below are four of the seven principles on which ISO 9000 series are based. Match a potential benefit to each of the quality management principles (QMP).
Answer:
Explanation:
Explanation:
Quality management principles:
Customer focus = Increased revenue and market share
Engagement of people = Enhanced trust and collaboration throughout the organisation Improvement = Enhanced drive for innovation Evidence-based decision-making = Increased ability to demonstrate effectiveness of past actions According to the Quality management principles document published by ISO, each quality management principle has a statement, a rationale, key benefits, and actions you can take to apply it. Based on these descriptions, the potential benefits can be matched to the corresponding principles as follows:
Customer focus: The primary focus of quality management is to meet customer requirements and to strive to exceed customer expectations. The key benefits of this principle include increased customer value, customer satisfaction, customer loyalty, repeat business, reputation, customer base, revenue and market share.
Engagement of people: Competent, empowered and engaged people at all levels throughout the organization are essential to enhance its capability to create and deliver value. The key benefits of this principle include improved understanding of the organization's objectives and values, increased involvement in improvement activities, enhanced personal development, increased motivation and empowerment, enhanced trust and collaboration, and increased recognition and rewards.
Improvement: Successful organizations have an ongoing focus on improvement. The key benefits of this principle include improved organizational capabilities, alignment of improvement activities at all levels, increased ability to anticipate and react to opportunities and threats, enhanced drive for innovation, and increased levels of satisfaction.
Evidence-based decision-making: Decisions based on the analysis and evaluation of data and information are more likely to produce desired results. The key benefits of this principle include improved decision-making processes, increased ability to demonstrate the effectiveness of past decisions, increased ability to review, challenge and change opinions and decisions, and increased ability to improve performance.
NEW QUESTION # 42
You are carrying out an audit at a single-site organisation seeking certification to ISO 9001 for the first time.
The organization manufactures cosmetics for major retailers and the name of the retailer supplied appears on the product packaging. Sales turnover has increased significantly over the past five years.
You are interviewing the new Product Development Manager. You note that a software application called SWIFT is used to help control the product development process.
You have gathered audit evidence as outlined in the table. Match the ISO 9001 clause 8.3 extracts to the audit evidence.
Answer:
Explanation:
NEW QUESTION # 43
You work for an organisation, 'A', which provides packaged food to the public. You are asked to lead a team (you as the leader and two other auditors) to audit a supplier, 'B', which provides packaging materials to your organisation. It is 4 p.m. and the audit is close to an end; you are having an internal meeting with the team to decide what will be presented to the auditee during the Closing meeting.
The Closing meeting was scheduled
for 5 p.m.
You, as audit team leader, audited top management, the laboratory, and the storage of raw materials.
Auditor 1 audited the two manufacturing lines and dispatch areas.
You to Auditor 1: "What findings would you report?"
Auditor 1: "When reviewing the Dispatch records, I noticed that during the morning two different trucks (Number 011 and 025) delivered the same batch number of the product (Batch 33555). Truck 011 left the plant at 9.15 am and Truck 025 left the plant at
11.30 am. Procedure P-02 Rev.3 says
that trucks should carry a complete batch. The batch number, once on the truck, is captured using a QR device." You: "OK, what do you think?" Auditor 2: "I think that this is a nonconformity." You: "OK. How would you describe the evidence on which the nonconformity will be based"?
Identify which one of the following statements best describes the identified nonconformity.
- A. The batch 33555 was delivered split in two different trucks (011 and 025).
- B. Dispatch personnel are not fully aware of the need to conform to written procedures.
- C. A product delivered to the client was not identified as required in P-02 Rev 3.
- D. Dispatch personnel do not always carry out its activities in conformance with Procedure P-02 rev 3.
Answer: A
Explanation:
According to the definition in ISO 9000, a nonconformity is "non-fulfillment of a requirement". There are three parts to a well-documented nonconformity: the audit evidence to support auditor findings; a record of the requirement against which the nonconformity is detected; and the statement of nonconformity1. In this case, the audit evidence is the dispatch records that show the same batch number of the product being delivered by two different trucks at different times. The requirement is the procedure P-02 Rev.3 that says that trucks should carry a complete batch. The statement of nonconformity is that the batch 33555 was delivered split in two different trucks (011 and 025), which does not conform to the procedure. Therefore, option C best describes the identified nonconformity, as it includes all three parts of a well-documented nonconformity.
Option A is not correct, as it does not state the audit evidence or the requirement. Option B is not correct, as it does not specify the audit evidence or the statement of nonconformity. Option D is not correct, as it does not match the audit evidence or the requirement. References: 1: ISO 9001 Auditing Practices Group Guidance on Nonconformity - Documenting.
NEW QUESTION # 44
Which two of the following are included in the objectives of the 'Stage 1 initial certification audit'?
- A. To evaluate the performance of monitoring and reviewing activities.
- B. To make a decision on certification to ISO 9001:2015.
- C. To evaluate the internal audit and management review processes.
- D. To evaluate the preparedness of the organisation for a Stage 2 audit.
- E. To review the quality manual.
- F. To evaluate the operational processes of the organisation.
Answer: D,E
Explanation:
*To evaluate the preparedness of the organisation for a Stage 2 audit: This objective involves assessing the readiness of the organisation to undergo the Stage 2 audit, where the conformity and effectiveness of the quality management system will be verified123. The audit team will check the level of implementation and understanding of the quality management system, identify any major gaps or nonconformities, and confirm the audit scope, criteria, and plan123.
*To review the quality manual: This objective involves reviewing the documented information of the quality management system, such as the quality policy, the quality objectives, the scope, the processes, and the procedures, to ensure that they meet the requirements of ISO 9001:2015123. The audit team will also evaluate the organisation's understanding and application of the standard, and identify any areas of improvement or concern123.
The other options are not included in the objectives of the Stage 1 initial certification audit, according to the web search results from my internal tool. They may be related to other stages or types of audits, but they are not the focus of the Stage 1 audit.
Therefore, the correct answer is B and D.
References: 1: ISO 9001 Certification Audits | Stage 1 and Stage 2 - 9001. Simplified 2: Stage 1 of your Audit
| NQA Blog 3: Getting Certified to ISO 9001 - the Stage 1 Audit
NEW QUESTION # 45
......
Go to ISO-9001-Lead-Auditor Questions - Try ISO-9001-Lead-Auditor dumps pdf: https://actualtest.updatedumps.com/PECB/ISO-9001-Lead-Auditor-updated-exam-dumps.html